Best Hybrid Table Saw Reviews: Get The Top Table For The Money

One of the best investments you can make if you are into woodworking or your job involves working with wood is a hybrid table saw. This kind of table saw is a cross between the cabinet saw and the more affordable contractor saw, hence the name.

Like a cabinet saw, a hybrid encloses its motor in the base, which improves dust collection. Many run on a standard 120-volt circuit. Below are two true hybrids, plus a jobsite saw and a cabinet saw for comparison.

Best Hybrid Table Saw Reviews

Picture	Product	Price
	Laguna Tools Fusion 36 in RIP Table Saw	$$$$
	Shop Fox W1837 10-inch 2 HP Open Stand Hybrid Table Saw	$$$$
	Dewalt DWE7491RS 10-inch Jobsite Table Saw	$$$
	Shop Fox W1819 3 HP 10-inch Table Saw	$$$$$

1. [Laguna Tools Fusion 36 in RIP Table Saw](https://www.amazon.com/dp/B009670KLW?tag=wwnation-20)

Click for Price

This is the Laguna Fusion with a 36-inch rip capacity, the model Laguna sells as the Fusion F2. It has a 1-3/4 HP TEFC motor that runs on a standard 110-volt outlet, a 10-inch blade and a 5/8-inch arbor. A quick-release riving knife is included.

What sets it apart from most hybrids is that the trunnions mount to the cabinet, as on a cabinet saw, rather than under the tabletop. That adds stability and makes blade alignment easier.

Pros:

• This is a solidly-built table saw. It doesn’t just feel sturdy, the design is functional as well. The rails extend nicely, so you can fit all those attachments without issues.
• The trunnions mount to the cabinet, like a cabinet saw, for stability and easier alignment.
• It comes with a fence storage.
• It runs on a standard 110-volt household circuit, so you do not need a new 240-volt outlet.
• Adjustments are easier.

Cons:

• Some said it does create a bit of dust but nothing that the dust collector can’t rectify. It is also a bit more expensive.

2. Shop Fox W1837 10-inch 2 HP Open Stand Hybrid Table Saw

Click for Price

The Shop Fox W1837 has a 2 HP single-phase motor. Its enclosed cabinet-style base has a built-in dust port. The table itself is made from cast iron for durability and the wings are made from steel. You can rely on its rip capacity of 15 inches when going to the left and 30 inches when going to the right.

Pros:

• You get many benefits of a cabinet saw at a lower weight and price.
• It has a dust control feature.
• The anti-kickback pawls ensure your safety when using this table saw.
• It also features quick replacement of blade guard.
• Cast iron trunnions help damp vibration.
• The blade tilt feature comes handy when taking on those more difficult angles.
• There is a clear guard for the blade. A riving knife keeps the kerf from closing on the back of the blade, which helps prevent kickback.
• It doesn’t require a lot of adjustments, according to users.

Cons:

• Some said the top is not completely flat.

3. [Dewalt DWE7491RS 10-inch Jobsite Table Saw](https://www.amazon.com/dp/B00F2CGXGG?tag=wwnation-20)

Click for Price

Strictly speaking, this is a portable jobsite saw, not a hybrid. It is here for readers who need a saw that moves.

Its rack and pinion fence moves smoothly and stays parallel. It has a 32-1/2-inch rip capacity and a 15-amp motor, per DeWalt's DWE7491RS page. A flip-over material support helps with narrow rip cuts.

Pros:

• Its rolling stand sets up and folds away easily.
• It comes with a dust port collection to prevent dust from getting everywhere in your workroom.
• At about 90 pounds, it is far more portable than any hybrid.
• The least expensive saw here.
• It comes with a 3-year limited warranty.

Cons:

• Some said the rack and pinion rail feature can dig into the unit’s rail.
• Smaller table and less mass than a hybrid, so it is less stable for big panels.

4. Shop Fox W1819 3 HP 10-inch Table Saw

Click for Price

The W1819 is a 3 HP cabinet saw rather than a hybrid, and a 3 HP motor needs a 240-volt circuit. It is here for readers who have outgrown a hybrid.

The table and large trunnions are cast iron. It has a quick-release riving knife, a blade guard and a T-style fence.

Pros:

• It comes with a t-slot miter gauge that you can adjust with ease.
• The fence extension is anodized
• A magnetic switch with thermal overload protection.
• The riving knife has a quick release feature.
• The cast iron assembly is durable.

Cons:

• It is the most expensive choice in this list.
• Needs a 240-volt circuit.

The Benefits of a Hybrid Table Saw

A hybrid table saw gives you many features of a more expensive cabinet table saw for less money. Cabinet saws have more power and mass, but they cost more and usually need 240 volts.

Compared with contractor saws, hybrids are portable and easier to use in a home shop thanks to enclosed motors and better dust collection. Most have motors of about 1-3/4 to 2 HP, and many run on 110 to 120 volts.

They are still heavy stationary saws, not jobsite tools.

Which One Should You Get?

Now which of these products should you get?

Best Features: [Laguna Tools Fusion 36 in RIP Table Saw](https://www.amazon.com/dp/B009670KLW?tag=wwnation-20). Cabinet-mounted trunnions, a 36-inch rip and a 110-volt motor make it the best hybrid here, if the price fits your budget.

Good Price and Good Features: Shop Fox W1837 10-inch 2 HP Open Stand Hybrid Table Saw. If you want something that isn’t as expensive as the previous one but can still offer a lot of good features, try this one from Shop Fox. It has a cast iron table, a riving knife and good dust collection.

Portable and Inexpensive: [Dewalt DWE7491RS 10-inch Jobsite Table Saw](https://www.amazon.com/dp/B00F2CGXGG?tag=wwnation-20). This is the most portable and least expensive choice, though it is a jobsite saw rather than a hybrid.

Built to Last: Shop Fox W1819 3 HP 10-inch Table Saw. If you want a full 3 HP cabinet saw and have a 240-volt circuit, this is the heavy-duty choice.

Tips on Buying the Best Hybrid Table Saw

Buying the best hybrid table saw entails scrutinizing your choices through a few important factors. Here are those factors you need to take into consideration:

Cutting Accuracy and Smoothness

A good hybrid saw should make clean rip, cross and bevel cuts. Look for a fence that locks parallel to the blade and an accurate miter gauge, though you can upgrade the gauge later.

For even more refinement suitable for more artistic projects, consider cutting with a jigsaw instead.

Power

Measured in horsepower, this plays a big role in how the hybrid table saw will function. Too little power bogs down in thick hardwood. A 1-3/4 to 2 HP hybrid handles most home shop work, including ripping 8/4 hardwood with a sharp rip blade.

More power does not cause kickback, but 3 HP and larger motors usually need a 240-volt circuit.

Riving Knife

Kickback happens when the stock pinches the blade and gets thrown back at you. A riving knife or spreader keeps the kerf open, and OSHA lists spreaders, anti-kickback fingers and rip fences as key safeguards, per OSHA's kickback eTool. Use a push stick for narrow rips. When buying a hybrid table, look for one with this feature. Check to see if this knife has the same curve with that of your saw’s blade. You might also want to consider getting a table saw with a riving knife that has a quick release function.

Adjustable Features

The ability to adjust the blade alignment is a welcome feature. What this does is enable you to find the best alignment that can deliver the best results. A blade that is parallel to the miter slot and fence cuts cleaner and reduces kickback.

Blade height and bevel controls should turn smoothly without binding.

Sensors

Table saws cause serious hand injuries. Saws with flesh-sensing technology, such as SawStop, stop the blade almost instantly when it touches skin. They cost more, but they greatly reduce injury severity.

Drive Belt

The drive belt affects vibration. Many woodworkers prefer saws with Poly-V (serpentine) belts over single V-belts because they run smoother and transfer power better.

Dust Control Function

Fine wood dust is a health hazard, so good dust collection matters. Most hybrids have a dust port for a shop vacuum or dust collector.

Overall, you would also want to look for one with a sturdy built. Make sure the stand is even and strong to withstand the vibrations from the belt and motor.

What’s Next?

We recommend getting the following hybrid table saws:

• Laguna Tools Fusion 36 in RIP Table Saw
• Shop Fox W1837 10-inch 2 HP Open Stand Hybrid Table Saw
• Dewalt DWE7491RS 10-inch Jobsite Table Saw
• Shop Fox W1819 3 HP 10-inch Table Saw

Make sure you achieve the wood design you are after with the right tools. Visit our homepage for some product reviews and recommendations that can help you identify the best tools that you need for your woodworking projects.

Sources

• 10-In. Jobsite Table Saw and Rolling Stand DWE7491RS, DEWALT
• eTool: Woodworking, Machine Hazards, Kickbacks, OSHA