Woodwork NationWoodworking tool reviews, comparisons and shop guides

Best Drill Press Table Reviews: The Top Workstations for the Money

By Peter Lynn · · Updated

Best Drill Press Table
Contents

Best Drill Press Table ReviewsThe small cast iron table on most drill presses has little room and no fence. An auxiliary drill press table adds a larger flat surface, a fence, and clamping tracks for more accurate drilling. Here are four worth considering.

Best Drill Press Table Reviews

1. WEN DPA2412T Drill Press Table

WEN DPA2412T Drill Press Table

Click for Price

At 23-7/8 by 11-7/8 inches, this table gives you far more surface than a stock drill press table. It has onboard rulers for quick measuring. Its 1-inch thick MDF body provides maximum stability and resists flexing.

The adjustable fence slides back and forth to suit the project. A removable insert lets you drill through the work without damaging the table. It is made for WEN drill presses but fits most other brands.

Pros:

It adds a lot of work surface.

The included rulers save you from reaching for a tape measure.

The removable insert protects the table when you drill through the work.

The mounting clamps are easy to secure. It clamps on surfaces from 5 to 16 inches of width.

It is sturdy, and the sliding fence helps position the work.

Your purchase is protected by a 2-year warranty.

Assembly is simple, and it fits most drill presses.

It has a low price tag, ideal for tight budgets.

Cons:

MDF can swell if it gets wet, so keep it dry.

2. Fulton Drill Press Table Thick and Aluminum L Fence

Fulton

Click for Price

This is one of the thickest drill press tables out there. It has dimensions of 15 inch x 24 inch x 1-3/8 inch. Both the top and bottom are laminated to resist warping, a common problem with unlaminated tables. The smooth top lets work slide easily and cleans up fast.

Its track mounting system works with most drill presses, with either a slotted or a non-slotted table.

Pros:

It is easy to mount. The only assembly is screwing on the T-tracks.

It feels very solid. At 1-3/8 inches it is thicker than most competitors, and the laminated surface is durable.

Attachment is tight. There are no extra movements or extra wobbles when you use it. It also comes with a hold down clamp that works in keeping items secure to your table.

The fence is lower with this drill press table. This makes it easier to move it out of the way when not needed.

It is compatible with most drill presses. You can choose between the post knobs or the aluminum hold down clamps depending on the kind of drill press you have.

Cons:

It doesn’t come with any instruction.

3. Woodpeckers Precision Woodworking Tools Drill Press Table

Woodpeckers Precision

Click for Price

At 16 by 23 by 1 inch, it gives you plenty of room. It is a solid MDF table laminated on both sides. T-tracks are screwed in from underneath, and the fence has laser-engraved scales for quick measurements.

The top is Formica MicroDot laminate, whose texture adds traction. A removable insert protects the table when you drill through.

Pros:

The MDF core is strong and stays flat.

The Formica MicroDot surface gives a better grip on the work.

Use the insert to protect your work surface when drilling through materials. The insert is removable and dispenses the need for a backer board. If it gets damaged, you can easily replace it using your preferred material as long as it is half an inch thick.

The T-tracks are wide and bolted under the table in order to prevent them from being pulled out when you use the clamp option.

The laser-engraved scales are easy to read, and the table is sturdy and well built.

Cons:

Some people might find this a bit too expensive for their needs.

4. MLCS 9765 Drill Press Table

MLCS 9765

Click for Price

This 7/8-inch-thick MDF and melamine drill press table is a good choice for the hobbyist. It fits most drill presses, and the fence is fully adjustable.

Pros:

It is affordable and well built, though thinner than the others.

All the things you need for installation are already included in your purchase. Use the 2 T-tracks included to secure this to a drill press. Installation just takes a few minutes.

It is compatible with almost all drill presses.

You can remove the fence if you are working with bigger wood materials. It is easy to detach and put back.

The surface is flat.

Cons:

There were those who said the clamp mechanism is of poor quality.

Which Drill Press Table is Great for You?

WEN DPA2412TMost Affordable: WEN DPA2412T Drill Press Table. It is affordable, sturdy, and fits most drill presses.

Thickest and Most Durable: Fulton Drill Press Table Thick and Aluminum L Fence. At 1-3/8 inches thick, it is the stiffest table here for heavy work.

Value for Your Money: Woodpeckers Precision Woodworking Tools Drill Press Table. It costs more, but the build quality, bolted tracks, and textured surface justify it.

MLCS 9765Perfect for Hobbyists: MLCS 9765 Drill Press Table. This is a good choice for the occasional woodworker. It is thinner but fine for medium-duty jobs and easy to install.

Tips in Finding the Right Drill Press Table for You

MLCS 9765

Here is what to look for in a drill press table:

  • Choose the right size and thickness.

Pick a size that suits your work and fits your drill press. Thicker tables flex less under clamping and drilling pressure; about 1 inch or more is a good target.

  • It should be compatible with your drill press.

Most auxiliary tables fit most drill presses, but check the mounting hardware against your drill press table's size and slots.

  • Make sure assembly will go without a hitch.

The best tables are simple to assemble, with T-tracks that bolt on easily.

  • It should have a good surface that will make woodworking easier

A laminated surface is durable and easy to clean. Smooth laminate lets work slide; textured laminate adds grip.

  • The clamp mechanism should work without any problems.

Check that the clamps are sturdy and easy to use. Secure the workpiece so it can't spin when the bit grabs, and remove the chuck key before starting.

  • Be sure to buy one with a good quality and build.

Look for a solid MDF or plywood core with a durable surface and a replaceable insert.

Conclusion

The following are the most-recommended drill press tables you can find today:

For more drill and accessory reviews, check out our homepage.

Sources

More in Drills