Best Budget Table Saws: Top Inexpensive Models

If a table saw was used for rip cuts only, it would still be a valuable tool. There’s simply no easier or more accurate way to rip a board than on a table saw.

Table saw prices range widely, and portable jobsite saws are the most affordable way to get a good one.

In my selection of the best budget table saw, I looked for the features you want in an inexpensive model: a fence that locks parallel, enough rip capacity, and proper safety equipment.

OUR TOP PICK

Top Pick for this roundup is the Dewalt DCS7485B Compact Table Saw. It is a cordless saw with a brushless motor and a rack-and-pinion fence. Note that the DCS7485B is sold as a bare tool: the FLEXVOLT battery and charger cost extra, which matters on a tight budget.

Check Current Price

The Best Budget Table Saws Are:

Product	Details
1. Dewalt DCS7485B Compact Table Saw	1. Dewalt DCS7485B Compact Table Saw Top Pick	- Runs on FLEXVOLT 60V batteries (sold separately) - Wide ripping capacity of 24 inches - Rack and pinion fence rails - Power loss reset system - Onboard storage	Check Current Price
2. Dewalt DWE7485 Compact Jobsite Table Saw	2. Dewalt DWE7485 Compact Jobsite Table Saw	- Powerful 15-amp motor - Compact and portable design - 24-1/2-inch ripping capacity - Anti-kickback pawls - Modular guard system	Check Current Price
3. Tacklife MTS01A 10-Inch Table Saw	3. Tacklife MTS01A 10-Inch Table Saw	- Transparent and versatile blade guard - Best miter gauge design - 0 to 45 degrees bevel cutting angles - Aluminum extension tabletop - Onboard storage	Check Current Price
4. Dewalt DW745 Compact Table Saw	4. Dewalt DW745 Compact Table Saw	- Has a steel roll cage - Blade diameter of 10-inch - Premium micro-grain carbide blade - Ripping capacity of 20 inches - Features a rack and pinion fence system	Check Current Price
5. Bosch GTS1031 Jobsite Table Saw	5. Bosch GTS1031 Jobsite Table Saw	- Unique smart guard system - Powerful 15-amp motor - 18-inch rip capacity - Square lock rip fence	Check Current Price
6. Skilsaw SPT70WT-01 Worm Drive Table Saw	6. Skilsaw SPT70WT-01 Worm Drive Table Saw	- Self-aligning rip fence - 15-amp dual-field motor - Ripping capacity of 25 inches - No-load speed of 5300 RPM - Die-cast aluminum tabletop	Check Current Price

1. Dewalt DCS7485B Compact Table Saw (Overall Best Affordable Table Saw)

The Dewalt DCS7485B is a compact, portable cordless table saw for both DIY and jobsite use.

Specs

• Runs on FLEXVOLT 60V batteries (sold separately)
• Wide ripping capacity of 24 inches
• Rack and pinion fence rails
• Power loss reset system
• Onboard storage

The Dewalt DCS7485B runs on DeWALT's FLEXVOLT 60-volt batteries, and DeWALT lists a brushless motor. The listing is tool only, with no battery or charger included.

This unique tool is installed with a rack and pinion fence system that you can easily adjust using an ergonomically made gear for accurate and quick adjustments.

Another exceptional feature that comes with the Dewalt DCS7485B is the power loss reset system, which does a good job of preventing accidental restarts.

I would prefer separate on and off buttons, but the large paddle switch is easy to find quickly.

Pros

• No cord to trip over or route on a job site
• Rip capacity handles 4-by-8 sheets with outfeed support
• Fence adjusts effortlessly with a turn of a knob
• No need to worry about accidental restarts, thanks to the power loss reset feature
• Smart blade guard system keeps you safe from the turning blade

Cons

• Battery and charger sold separately
• Doesn’t come with a stand

Conclusion

If you want a cordless table saw and already own FLEXVOLT batteries, the Dewalt DCS7485B is the one to get.

Overall Rating – 5.0

CHECK CURRENT PRICE

2. Dewalt DWE7485 Compact Jobsite Table Saw (Best Rack and Pinion System)

If you are looking for an affordable table saw that does not only have a compact design, but also delivers superior cutting, then look no further than the Dewalt DWE7485.

Specs

• Powerful 15-amp motor
• Compact and portable design
• 24-1/2-inch ripping capacity
• Anti-kickback pawls
• Modular guard system

The fence system on the Dewalt DWE7485 uses a rack and pinion adjustment mechanism, which is great because it allows you to make smooth changes to its positioning.

It features a two-and-a-half inch dust port for attaching a vacuum, which will help to keep your home workshop or jobsite clean.

The 24.5-inch rip capacity is wide enough to rip OSB and 4-by-8 plywood down the middle, with outfeed support for the sheet.

But it is quite unfortunate that the Dewalt DWE7485 is not sold with a rolling wheel stand. This means you will have to incur additional costs if you want the portability of a stand.

Pros

• Corded, so no batteries to buy
• Compact size makes it ideal for jobsite and home shop use
• Fence adjustments are effortless with rack and pinion system
• Has a durable metal roll cage
• Modular guard system improves safety during operation

Cons

• It isn’t sold with a stand
• Blade size may be smaller for some woodworking applications

Conclusion

At a reasonable price, the Dewalt DWE7485 offers impressive features and solid performance, and it needs no batteries.

Overall Rating – 4.8

CHECK CURRENT PRICE

3. Tacklife MTS01A 10-Inch Table Saw (Best Miter Gauge Design)

The Tacklife MTS01A 10-Inch Table Saw has a 15-amp motor rated at 4,800 RPM, at a low price. Tacklife tools have become hard to find, so check availability.

Specs

• Transparent and versatile blade guard
• Best miter gauge design
• 0 to 45 degrees bevel cutting angles
• Aluminum extension tabletop
• Onboard storage

This product has an extension tabletop that is made of aluminum for durability, and extends up to 3.9 inches on both sides for added stability.

I really appreciate the well-made miter gauge, considering how easy it is to square it to the blade and how effective it is to produce neat crosscuts.

Another great feature is the ergonomically designed handle for lowering and raising the blade, which is properly contoured for consistent hand placement.

But it comes with a rugged yet not portable stand, which has no rolling wheels for mobility or curved handles for lifting and pushing.

Pros

• Comes with a very stable extension tabletop
• You can see through the blade guard for visibility and protection
• Miter gauge squares effortlessly to the blade
• Features on and off push buttons for ease of use and added safety
• Onboard storage adds convenience

Cons

• Comes with a non-portable table saw stand
• May not be a great choice for use with dado blades

Conclusion

The Tacklife MTS01A has a good price point that is accompanied by quality features, including a heavy-duty miter gauge and an aluminum extension tabletop.

Overall Rating – 4.8

CHECK CURRENT PRICE

4. Dewalt DW745 Compact Table Saw (Best Affordable Table Saw for Crosscutting)

The Dewalt DW745 Compact Table Saw offers strong cutting and ripping performance at a budget-friendly price. DeWALT's US site no longer lists it, so availability varies.

Specs

• Has a steel roll cage
• Blade diameter of 10-inch
• Premium micro-grain carbide blade
• Ripping capacity of 20 inches
• Features a rack and pinion fence system

This heavy-duty table saw comes equipped with a high performing 15-amp motor that offers an impressive no-load speed of 3850 RPM that will cut through wood with ease.

This product has telescopic fence rails, which is great because you can extend it when cutting wider workpieces and retract it to create a portable package.

Another exceptional feature that comes with the saw is the premium micro-grain carbide blade, which offers ultra-sharp cutting edges with minimum splintering.

But the thing is, the Dewalt DW745 doesn’t come with a stand. So, this means you have to suffer additional costs for table saw stand portability.

Pros

• Powerful motor cuts through wood effortlessly
• Rack and pinion fence rails allow for smooth and fast adjustments
• Steel roll cage is engineered to withstand jobsite impacts and drops
• Overload protection keeps power steady in wet or frozen wood
• Micro-grain carbide blade generates minimum splintering

Cons

• Package doesn’t come with a table stand
• Could be better with a slightly wider rip capacity

Conclusion

The Dewalt DW745 offers good cutting and ripping performance in a small package, with a capable miter gauge for crosscuts.

Overall Rating – 4.7

CHECK CURRENT PRICE

5. Bosch GTS1031 Jobsite Table Saw (Best Portable Design)

Get yourself up and running quickly with the Bosch GTS1031 Jobsite Table Saw at a budget-conscious price point. This tool is designed to provide portability, versatility, and good performance.

Specs

• Unique smart guard system
• Powerful 15-amp motor
• 18-inch rip capacity
• Square lock rip fence

The Bosch GTS1031 features a 15-amp motor with a no-load speed of 5,000 RPM.

Its rip capacity is kept a bit on the small side, accommodating just 18 inches in order to make the table saw more portable.

It provides a wide bevel angle range for superior versatility, while the easy to adjust miter gauge system allows for smooth and accurate crosscutting.

But the table saw is occasionally clogged with fine wood particles, which can easily jam the raising and lowering system of the blade.

Pros

• Delivers powerful RPM for superior cutting performance
• One-handed carry handle makes the design extremely portable
• Riving knife and anti-kickback pawls improve control
• Smart blade guard improves safety
• Strong table saw base is highly durable

Cons

• Can get clogged with fine sawdust
• You must buy a table saw stand separately

Conclusion

If a portable, versatile, high performing, convenient, and reasonably priced table saw is what you are after, then Bosch GTS1031 fits the budget.

Overall Rating – 4.3

CHECK CURRENT PRICE

6. Skilsaw SPT70WT-01 Worm Drive Table Saw (Best Worm Drive Gearing)

If you have been looking for a portable table saw that is engineered to deliver maximum torque and power at a budget price range, look no further than the Skilsaw SPT70WT-01.

Specs

• Self-aligning rip fence
• 15-amp dual-field motor
• Ripping capacity of 25 inches
• No-load speed of 5300 RPM
• Die-cast aluminum tabletop

This table saw uses Skilsaw's worm drive gearing, which adds torque for demanding rip cuts.

I really appreciate the 3.5-inch cutting depth and 25-inch ripping capacity, considering the large 4 by 8 plywood workpieces I can work on.

Another great feature is the portability of the table saw, which allows you to carry and transport the tool from your truck to your jobsite or home shop.

But I stand disappointed with the lack of a table stand. The aftermarket stand for this model seems cheaply made and it doesn’t have rolling wheels.

Pros

• Worm drive gearing adds torque for ripping
• 5,300 RPM no-load speed
• Available ripping capacity accommodates most woodworking projects
• Rugged table saw base and tabletop improve durability
• Self-aligning fence offers accurate adjustments and cuts.

Cons

• No stand is provided with purchase
• Compatible after-market stand appears cheaply made

Conclusion

If you want worm drive torque for ripping in a portable saw, the Skilsaw SPT70WT-01 is a good choice.

Overall Rating – 4.3

CHECK CURRENT PRICE

Buying Guide

Don’t allow a tight budget to stop your woodworking projects because there are many budget-friendly table saws that you can buy out there.

Here are a few things that I urge you to take into account during your search:

Price

Before buying, research the cost and availability of replacement parts.

The best cheap table saw won’t match a high-end model, but it should cut accurately and include proper safety equipment.

Table saw prices span from entry-level jobsite saws to cabinet saws that cost many times more. Budget saws sit at the low end of that range. For cordless saws, include the cost of batteries and a charger if you do not already own them.

Style of Table Saw

The best cheap table saws can either be a Benchtop, jobsite, or contractor model. Cabinet and hybrid table saws are usually high-priced.

Benchtop models are normally the cheapest, especially when they are bought without a stand. Then followed by jobsite and contractor models.

You can spend the least amount of money on a benchtop, if you are an occasional woodworker. If woodworking is more of a career to you, consider getting a budget jobsite model.

Solid Rip Fence and Rails

A rip fence and a miter gauge are the two most important parts of a table saw. So, no matter how budget-conscious the price range of a table saw is, make sure these two parts are up to the tasks.

Look for a table saw that has a rip fence that moves smoothly across the table and locks parallel to the blade.

Safety Equipment

Never skip safety features to save money. OSHA's table saw guidance calls for a blade guard, a spreader or riving knife, and anti-kickback fingers to prevent kickback, plus push sticks for narrow pieces. Every saw here ships with a guard and riving knife; keep them installed for through cuts.

Final Thoughts

The winner of this roundup is the Dewalt DCS7485B Compact Table Saw. It offers cordless convenience and the top features you need, as long as you budget for FLEXVOLT batteries.

So many things stand out for this model irrespective of the affordable price. It has a solid construction that includes a brushless motor, carbide blade, blade guard, miter gauge, and a quality rip fence.

The rip fence is integrated with rack and pinion fence rails that allow for smooth, fast, and accurate adjustments. And the miter gauge is easy to square to the blade for smooth crosscuts.

If you would rather skip batteries, the corded Dewalt DWE7485 gives you nearly the same saw for less.

Sources

• eTool: Machine Guarding - Saws - Table Saws, OSHA
• 60V MAX* Table Saw (Tool Only) DCS7485B, DeWALT